Our Ivesdale air conditioners are an important part of our lives. They keep us comfortable despite overbearing heat and humidity outside all summer, but because they run constantly for months and because they are such complicated pieces of machinery, they are prone to some problems. Here are some of the most common problems you’re likely to run into with an air conditioner and how to solve them:
A common problem that many people ignore or are unaware of is refrigerant leakage. It is possible that when the system was installed, it wasn’t properly charged, but most of the time if your system is low on refrigerant, it is because of a leak. You can’t just pour more refrigerant in and call it good, though.
The leak needs to be fixed, both for health and environmental reasons. If you notice that your system is low on refrigerant or you smell something off – often like acetone, call an Ivesdale air conditioning professional immediately for inspection and repair.
An air conditioner doesn’t do you any good if the sensors don’t work properly. Improperly working sensors will fail to properly read the temperature in the home or from your thermostat. So, it might be 80+ degrees in your home but if the thermostat reads it as 72, the system won’t turn on. The air conditioner itself probably still works fine, but unless it can successfully read the temperature, you won’t get the cooling you need to stay comfortable.
Check first to see if the sensor was moved or knocked toward the evaporator coil (which will keep the temperature reading low).
Your Ivesdale air conditioner acts as a dehumidifier as well, producing a liquid known as condensate. This liquid usually drains from the air conditioner into a designated area away from your home. However, if the condensate drain gets clogged or if the system wasn’t properly installed, that condensate can start to build up in your home. If you notice leakage around the coils, you may need a pump to remove the condensate properly.