Posts Tagged ‘Broadlands’

Broadlands Heating Installation Question: What Makes a Furnace High Efficiency?

Monday, January 23rd, 2012

You’ve probably heard about the new lines of high efficiency furnaces being released by popular home heating companies in Broadlands, but what exactly is different about these high efficiency devices from your current furnace? Let’s take a closer look at what a high efficiency furnace offers and why it can save you money.

Added Features

A high efficiency furnace uses familiar technology in a new way to reduce the amount of energy lost when combustion takes place. This means:

  • Sealed Combustion – Instead of open combustion which allows heat to escape during and after the combustion process, a high efficiency furnace uses a sealed chamber with carefully measured and fed airflow to burn fuel and produce heat. Exhaust heat can then be recaptured and used to heat air transferred to your air vents.
  • Two Stage Gas Valves – With a two stage gas valve, your furnace can respond to the temperature outside. There isn’t just one “on” switch. The furnace will regulate gas flow based on how much energy is needed to produce heat for your home. So, if there is a sudden burst of cold outside, the furnace will respond accordingly, but for most days when heating needs are low, it will use only the minimum amount of needed gas.
  • Programmable – High efficiency furnaces are now programmable, meaning you can set specific time limits for operation, change thermostat settings digitally and inspect the device through an electronic read out. The level of control given to you by a programmable high efficiency furnace can greatly reduce gas or electricity consumption.

Cost Benefit

The real reason many people are interested in high efficiency furnaces is that they are so much less expensive to operate. Instead of costing hundreds of dollars to run through the winter, they operate the bare minimum needed to heat your home. Using up to 95% of the fuel they consume to produce heat and regulating gas to cut how much is consumed during milder days, these furnaces are built to save you money.

If you have an old furnace in your Broadlands home that chews through energy like nobody’s business, now might be the time to consider the benefits of a brand new, high efficiency model.

Tags: , , , , , , ,
Posted in Heating | Comments Off

Ivesdale Plumbing Guide: How to Fix a Slow Drain

Monday, January 9th, 2012

Ever fill up a bathroom bowl or kitchen sink with water in your Ivesdale home and then wait forever for the water to drain? A clogged drain can take forever to free up and is often the source of frustration and a loss of precious time as you get ready for work or play.

The solutions to fixing a slow drain can be very simple or complex, requiring a little patience or expertise to a major service or repair bill. Let’s hope the solution is the former and not the latter. And here are some suggestions.

If your bathroom sink is draining slowly, remove the stopper and inspect it for any “cling-ons” – namely hair. One of the most common clogs can be hair wrapped around the shaft of the stopper. Remove the hair, replace the stopper, run some hot water and check to see how quickly the water drains down. If that simple fix doesn’t work, dig a little deeper.

Hair can be tangled in the flange or the horizontal rod and clip, further down the pipe. You may need to dig out the hair or debris with a long object like a screwdriver or wire hanger. Don’t bring out the “big guns” like a snake or auger if something simpler will do the trick.

Once the debris is cleared, you may even want to use a small hand plunger to force air down the pipe and remove any other residual debris that may be slowing down the water flow. These steps should clear up the problem. A liquid or granulated drainer cleaner may also break up the clog. Running hot water can do the trick, too.

If these solutions don’t work, a slow drain could be the result of a more serious problem. At that point you may want to use a snake on the problem or call a professional plumber to fix it.

If your kitchen sink drains slowly, the problem could be a build-up of food or grease in the pipes. Once again, using a plunger or chemical drain cleaner may solve the problem. But don’t discount the fact that something may be blocking the pipes, like a piece of bone or a child’s small toy (if you have a mischievous toddler). A visual check of the problem might be the simple solution to the slow drain “mystery.”

If you are at your wit’s end and the water drainage continues to be a problem, call an Ivesdale plumber. They may even be able to walk you through a cleaning process over the phone.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

Broadlands Plumbing Tip: Taking Good Care of Your Garbage Disposal

Wednesday, December 28th, 2011

The garbage disposal is one of those innovations that we generally take for granted now in Broadlands, but was probably absolutely amazing to the guy who first saw one in action. The convenience of having a whirring blade just below your sink to pulverize food into pipe-friendly paste is pretty incredible.

However, because we sometimes take disposals for granted, we forget to take care of them properly. Disposals don’t ask for much, just a little attention now and then to keep them performing at their peak. There are some pretty simple tasks you can do periodically to keep your disposal happy:

  • When using the disposal, be sure to run water down the drain and leave it running for 15 to 20 seconds after you turn the disposal off.
  • The smaller the pieces going down the disposal, the better. Those blades may be powerful, but they can still sputter and stall against a formidable foe.
  • Every so often, dump a tray of ice cubes down the drain and turn the disposal on while running cold water. This sharpens the blades and helps keep them clean. The noise is a little intense, but it’s perfectly safe.
  • Grease, corn husks, potatoes and anything made of paper or plastic are not suitable for the disposal or plumbing in your home. Throw them away instead.
  • To subdue unpleasant odors, throw some lemon peels down the disposal.
  • To clean your disposal and remove mineral deposits, pour in a cup of vinegar and let it sit for about an hour, then flush with hot water.
  • Never use bleach or other chemicals to clean your garbage disposal, as it can damage the machinery.

These small steps, simple as they may seem, can go a long way toward keeping your system running strong and continuing to make your life easier for a long time. You can see some of these tips in action, as well as learn how to fix some common disposal problems from this video at GMC Trade Secrets.

It’s a dirty job, so help your disposal do it right.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Question from Penfield: How Can I Prevent Clogged Drains?

Monday, December 12th, 2011

One of the most frustrating plumbing issues any Penfield homeowner will encounter is a clogged drain. Not only are clogged drains a nuisance, they are largely avoidable, so it becomes that much more frustrating when it happens since you know that you could have taken preventative measures long before the problem occurred. To help stop your drains from clogging in the future, here are some useful preventative tips:

  • Set Cooking Grease Aside – Cooking grease is thick, viscous and clings to the sides of almost all types of pipes. So, instead of pouring it down your sink and hoping it clears out on its own, pour it into a coffee can and set it aside. There are a number of places where you can recycle old grease.
  • Flush Garbage Disposals – When you use your garbage disposal, it is imperative that you flush cold water through the system at the same time. Without water to flush the food particles through the pipes, anything ground up in the disposal will become stuck and with the application of grease or other food particles can easily become a thick clog.
  • Pour Boiling Hot Water Down the Pipes – At least once a week it is a good idea to pour 2-3 quarts of boiling water down your sinks and bathtub to loosen any pre-clogs that have formed. Things like soap, grease, food, and hair can all be dislodged by an application of hot water on a regular basis.
  • Taking Care with Your Toilet – A toilet is not designed to flush anything that will technically fit down the hole. Even for paper products that seem to be flushable, take care in what goes into the toilet bowl. Paper towels, garbage, and wrappers should not be flushed or they are likely to cause clogs.
  • Use Strainers – Install strainers on all of your sinks, including the ones in your bathroom. A simple strainer will catch excess bits of food, hair, and other grime that has a habit of falling down the drain and getting flushed along with the dishwater or during a shower.

With care, your drains will remain clog free and never require the services of a snake or a plumber. If you do get past the point of no return, do not panic just yet – there are a number of steps you can take to remove a small clog without chemicals or professional help. However, if the clog refuses to budge or begins to backup, know when to call a plumber.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Make Your Heating System More Energy Efficient in Fisher

Friday, December 2nd, 2011

Efficiency is what you want when it comes to heating your Fisher home. You want a furnace that provides the greatest degree of accurate indoor comfort while at the same time operating at peak efficiency to reduce energy usage and lower utility bills. That’s seems like a lot to ask of a simple mechanical system but you should expect it out of the furnace in your basement, attic, or mechanical room.

It is especially important today as energy costs have steadily increased, including electricity, natural and propane gas, and oil. The best way to combat rising prices is to have a furnace that uses less energy. It is a simple statement but one that bears repeating: higher efficiency equals lower operating costs.

Here are some ways to make your heating system more energy efficient:

  1. Clean or replace furnace filters on a regular basis. A dirty or clogged filter will make your furnace work harder and become much less energy efficient. Monthly or quarterly cleaning or replacements are easy to do and will result greater operating efficiencies.
  2. Inspect your home’s ventilation system for accumulation of dirt, dust, or debris. Have you recently added new carpeting? Do your pets shed? Is there a large number of people living in your home? If you answered yes to any of these questions you may need to inspect your ventilation system. You may need to remove the ventilation grilles to take a closer look. Wiping down the inside of your duct work or vacuuming the duct work with a hose attachment will often do the trick. You can also schedule a duct cleaning with a local professional duct cleaning contractor.
  3. Remove obstructions from around vents and grilles. You need a clean path for air to flow into and out of rooms. Restricted airflow makes your furnace work harder and become less energy efficient.
  4. Consider an upgrade to a two-speed or variable speed furnace. Most older furnaces operated on one speed, which cycled on and off and consumed a lot of energy. Today’s furnaces operate at lower speeds, consuming less energy and often remaining on to keep a steady airflow and prevent constant on and off cycling. These newer furnaces are much more energy efficient and cost less to operate.
  5. Adhere to a regular schedule of planned furnace maintenance. If you don’t clean and inspect your furnace on a regular basis, schedule service calls with a local qualified heating contractor. Your contractor will likely have a service agreement plan to fit your budget, which allows for annual inspections, priority emergency service calls, and discounts on parts and services.

Besides saving on energy costs, your efficient furnace will leave a smaller “carbon footprint.” Your efficient furnace will exhaust less carbon dioxide into the atmosphere and maintain a more “green” profile. And being ecologically friendly can be just as important as saving money.

You can be assured that an energy efficient heating system will keep more money in your pocket this fall and winter. You can take that to the bank.

Tags: , , , ,
Posted in Heating | Comments Off

How Often Should I Have My Geothermal System Checked? A Question From Philo

Monday, October 3rd, 2011

The beauty of a geothermal system, installed in Philo or anywhere, is that is requires very little maintenance. They have fewer mechanical components are than other heating systems – and most of these components are underground or inside, shielded from the outdoor elements. The underground tubing usually is guaranteed to last 25-50 years and inside components are easily accessible for servicing.

Nonetheless, keeping a geothermal system working at peak efficiency is very important. If the geothermal system loses some of its efficiency, it will cost home and building owners money in energy costs, which makes little sense since geothermal system installation costs are higher than most other heating systems.

Its key component is the ground loop system, polyethelene tubing which carries refrigerant from below the Earth’s surface and back to an above-ground compressor. When installed correctly, the buried ground loop can last for decades. A leak in the metal tubing is usually the only problem if the ground loop is not installed correctly. In the case of a leak, it may be necessary to dig up the tubing – often installed at least ten feet below the surface – and repair the leak.

Other geothermal system components include its air handling unit, compressor, and pump. These components require periodic system checks by qualified professional heating and cooling technicians. Maintenance normally requires filter changes and component lubrication, to name the most common. In some cases, building owners can perform their own filter replacement and refill of lubricants. However, it is recommended that an experienced technician perform a multiple-point inspection of the geothermal system components, usually during regularly scheduled annual or bi-annual service calls.

Tags: , , , , ,
Posted in Geothermal | Comments Off

Air Conditioners and Energy Use by Percentage: A Guide From Ivesdale

Friday, September 9th, 2011

It’s no secret that air conditioners use up a lot of electricity and can add substantially to your energy bills during those warm summer months in Ivesdale. But did you know that they actually account for an estimated 11% of the total energy used in all buildings in the US each year? This is a staggering figure and makes it easy to see why it’s best to invest in the most energy efficient system possible.

Keeping Your Consumption Down

There are plenty of reasons to try and keep your energy consumption down. You want to save on your energy bills, and the less energy you use, the better it is for the environment. The best and most straightforward way to go about this is to purchase only highly energy efficient appliances and equipment, and that includes air conditioners.

Because air conditioner usage accounts for such a substantial part of the total energy used in this country, putting more energy efficiency models into use is the best way to cut that usage down.

Supplementary Cooling

However, there are other ways to reduce the workload of your air conditioner. For instance, you can use a ceiling fan to maintain good air circulation and keep your home cool. Using a ceiling fan with an air conditioner, even on the hottest days of the year, allows you to turn up your thermostat a bit to conserve energy while still enjoying a comfortable indoor environment. And because ceiling fans use so little energy to operate, you’ll come out ahead on your energy bill.

Passive Cooling

There are also several passive cooling methods you can employ to keep the temperature in your home down. Blocking out sunlight is the most important of these, so keep your blinds closed on any windows that receive direct sunlight, particularly in the early afternoon. Alternately, you can have awnings put up, which allow you to block the direct sun while still keeping the blinds open.

Shade is another effective passive cooling device. Planting trees around your home to block out the sun at the hottest times of day is a totally energy-free way of keeping your home cool and reducing the workload on your air conditioning system. The less your air conditioner has to work, the less energy it consumes and the lower your energy bills will be.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

How Do I Check for a Dirty Evaporator Coil? A Question From Springfield

Wednesday, August 17th, 2011

The evaporator coil is an essential piece of your air conditioning system, in Springfield or anywhere. It absorbs heat from air that passes over it, and that air then travels into your home to cool it. So if your coil is dirty or isn’t functioning properly, the cooling power of your air conditioning system is diminished. Fortunately, this problem is fixed easily by cleaning the evaporator coil. You can do this on your own or have a professional come in to take care of it.

Signs of a Dirty Evaporator Coil

The most obvious sign of a dirty evaporator coil is an overall drop in system pressure. As long as you know what constitutes a normal pressure for your system, you should be able to tell if the current pressure is below that level. If it is, a dirty evaporator coil is probably your culprit. You can also check the static pressure in your system to see if that is low, but this requires specialized equipment.

Even if you don’t notice any particular signs that your air conditioning system isn’t working properly, it’s a good idea to clean your evaporator coils once a year or so. This can help prevent any larger problems from developing in the future.

Finding Your Coil

Probably the hardest part of cleaning an evaporator coil is reaching it. Unlike your condenser coil, which is located in your outdoor condenser unit, the evaporator coil is found inside near the air handler or furnace. If you have the owner’s manual, there should be detailed instructions telling you where the coil is and how to safely access it.

Alternately, you can have an HVAC technician show you what to do the next time they come out to work on your system. Whatever you do, though, make sure that power to your AC unit is completely shut off before you start working on it. Once you’ve gained access to the coil, use a brush or vacuum attachment to remove any debris or sediment you find there.

The Importance of Maintenance

Cleaning your evaporator coil is only one part of the regular maintenance required to keep your air conditioning system in good working order for the foreseeable future. There are plenty of things you can do on your own, but it pays to have a professional come out once a year or so to check out the entire system and make any necessary repairs.

Tags: , , , ,
Posted in Air Conditioning | Comments Off