Posts Tagged ‘Dewey’

How to Make Your Champaign Heating System More Effective

Friday, January 6th, 2012

Everyone wants an effective heating system in Champaign – one that will provide steady, reliable heat without you having to spend hundreds of dollars each month on gas, oil or electricity. And while the best way to improve the efficiency of your heating system in most cases is to upgrade it, there are some simple things you can do around the house to boost its effectiveness. Here are some of the best:

  • Rearrange Furniture – Just having the heat on doesn’t necessarily ensure the heat entering your room is being distributed evenly. Move your furniture in such a way that there is a clear, unimpeded path from the registers and radiators to the rest of the room. Done properly, this will make it much easier to and faster to heat every room of your house.
  • Maximize Air Flow – Air flow can be maximized in a number of ways. Make sure you close any windows near a register or radiator and that you remove any large objects that might block air flow. You should also install things that can help move air like fans and always call someone in for changes to the arrangement of your vents or radiators.
  • Clean Registers or Radiators – The cleaner your radiators or dust registers are, the more efficiently they release their heat. Not only have that, but clean radiators and registers resulted in better indoor air quality. Weekly cleaning of each room’s heating source is highly recommended.
  • Install Ceiling Fans – Ceiling fans switched to blow down are incredibly effective for distributing air throughout the room. This will keep push warm air down and keeps cold air up – in effect, reducing the need for constant running of your furnace or boiler.

Effective heating is important to keep your home comfortable, reduce the cost of heating and prolong the lifespan of your furnace or boiler. You should also make sure your heating system is properly maintained throughout the year. Skipping maintenance visits (which are highly recommended annually) will put unnecessary stress on your system and shorten its lifespan substantially, not to mention the decrease in efficiency when heating your Champaign home.

Tags: , , , , ,
Posted in Heating | Comments Off

White Heath Plumbers Guide: How to Install a Toilet

Tuesday, January 3rd, 2012

Your White Heath home’s toilet is a relatively basic piece of plumbing equipment, but that does not mean that installing it is easy. This is certainly a job that many people can do on their own, but you should be prepared to devote the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

How Bad Is the Air in Your Home? A Guide from Dewey

Friday, November 18th, 2011

Every day you hear about another awful contaminant that can get into your Dewey home’s air supply. Radon gas. Carbon Monoxide. Nitrogen Dioxide. Smoke. Mold. The list gets longer with each passing year and many homeowners are understandably worried. However, before you run out and by the newest lineup of filters, purifiers, and UV lights, stop and think about just how bad your indoor air actually is.

When Was Your Home Built?

Homes built in the last 10-15 years tend to be well ventilated and may even have air quality systems already in place. It’s those built in the late 1970s and early 1980s that tend to have the worst ventilation (assuming they have not been updated since then).

This kind of poor ventilation can be dangerous, but usually only in that you have less fresh air and more indoor allergens and contaminants. Specifically, you’re most likely to suffer from things like pet dander, dust, pollen, and dirt in the air. On their own, these are not dangerous, but without fresh air to circulate them outside and ensure you get a steady, clean supply of air to breathe, they can make you ill.

How Bad Can It Get?

While it’s rare, some homes suffer from more advanced contaminations. The most common is mold. Mold grows primarily in dark, damp spaces. If your humidity levels get too high in the summer, the ductwork in your house is perfect for mold and it will blow the spores directly into your air, putting everyone at risk.

You should also be wary of exhaust fumes from your appliances that may not get properly removed from the house. Both of these problems can be fixed with regular duct cleaning.

Outdoor contaminants can also make it into your indoor air. Things like exhaust and smoke, gas, radon, or other outdoor pollutants should be tested for when you setup a new indoor air quality system. There are filters and purifiers that will remove almost all of these contaminants, but they are not always required, so you should check before making a decision.

Ultimately, the odds are that your home suffers only from some stale, dusty air. But, it is very important to keep everything clean and test it regularly to make sure nothing worse develops. Poor air quality is about more than just comfort – it’s an honest health issue.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off

Furnaces vs. Heat Pumps: A Guide From Dewey

Friday, October 14th, 2011

If you’re preparing to replace your existing heating system in Dewey, you may very well be struggling with the question of whether to go with a furnace or a heat pump for all of your future home heating needs. Each of these systems have their own advantages and drawbacks, and once you’ve narrowed it down to one type or the other, you’ll still have a pretty wide variety of products to choose from.

Furnaces are still the most popular type of home heating equipment on the market. You can get furnaces that run on gas, oil or electricity, although gas furnaces are by far the most common type of furnace around these days. The latest models are extremely energy efficient, with AFUE ratings reaching into the high 90%s.

Like heat pumps, furnaces use ducts to transfer heated air throughout your home. They typically require regular maintenance once every year or two depending on the type of furnace you have. Most modern furnaces are also made to be compatible with a central air conditioning or cooling system as well.

Heat pumps, on the other hand, don’t generate the heat that they circulate throughout your house. Instead they are able to extract the heat from the air outside and pump it inside. This means that they use much less energy than even the most energy efficient furnaces.

However, heat pumps are only capable of heating your house comfortably when the outside temperature is above freezing. If you live in an area with particularly long and frigid winters, you’ll probably find that you need to supplement your heat pump with another heat source. Because of this, it actually makes little sense to use a heat pump in more extreme climates.

On the other hand, if you live in an area with relatively mild winters, heat pumps can be a great option. They provide a constant flow of warm air to all parts of your home and can also keep you house cool during hot summer months. To cool your home, heat pumps simply reverse the process they use to warm it. They take the heat out of your indoor air and pump it outside. This is a very effective home cooling method and makes heat pumps a great solution for year round comfort.

Tags: , , , , , ,
Posted in Heating | Comments Off

Cooling Your House Naturally in Bondville

Monday, August 8th, 2011

In this day and age, it seems like no matter what type of problem you have, there’s a technological solution for it. But is that solution always the best? For instance, just because you can get a high-tech air conditioning system to keep your Bondville home at the same temperature regardless of the weather outside, does that mean that you should rely solely on that system?

Of course, the choice is yours, but before you decide how best to keep your house comfortable during the warm summer months, it’s a good idea to learn a little bit more about what your other options might be.

  • Cross-Ventilation – One of the easiest ways to take the edge off when the temperature starts to rise inside is to open windows on both sides of the house. This allows the breeze to come in one side and pass out the other, taking the stale, warm indoor air with it in the process and cooling off your house naturally.
  • Stack-Ventilation – If you have a two-story home, you may want to try stack-ventilation. This variation on cross-ventilation involves opening the windows on the bottom floor on one side of your home and on the top floor on the other. The differences in pressure from one area to the next cause fresh outdoor air to be sucked in on the ground floor and pushed out on the top floor, thereby creating a strong air current throughout your home.
  • Blocking Out the Sun – The number one reason that the interior of your house gets hot in the summer is exposure to direct sunlight, so anything you can do to diminish the amount of sun that actually makes it into your home, the better off you’ll be. All you really have to do is close the blinds on those windows where sun can come in to keep the majority of that heat from impacting your indoor environment.
  • Stay Away from Dark Colors – The color of the outside of your home can also have an impact on how hot it gets indoors. Dark colors absorb the heat, while light colors reflect it. So if you want to keep the temperature down inside, stick to light colors on the exterior of your home.
  • The Importance of Shade – Any type of shade will also keep the sun’s heat out of your home. Trees are a great source of natural shade. Awnings can provide great cooling power too without blocking out your view.

Tags: , , , ,
Posted in Air Conditioning | Comments Off