Posts Tagged ‘Furnace Maintenance’

A Guide from a Danville HVAC Contractor: Heating System Preventative Maintenance

Wednesday, December 7th, 2011

Ben Franklin once said, “An ounce of prevention is worth a pound of cure.” His famous quotation can apply to many things in life, including the heating system in your Danville home. While heating systems in Ben Franklin’s time consisted of wood burning stove and fireplaces requiring little maintenance, today’s sophisticated furnaces and building controls require a good dose of preventative maintenance in order to avoid mechanical failures and inefficient operation.

For example, a furnace runs better and lasts longer when you maintain a regular schedule of filter cleaning or replacing. A dirty or clogged filter can restrict airflow from the furnace into your home’s ventilation system and cause the furnace to work harder, putting more wear and tear on it and taking months, if not years, off of its useful life. If your furnace uses disposable filters, check them every month and replace them if necessary. If your furnace uses an electronic filter that requires cleaning, check it on a monthly or semi-monthly basis and clean it with soapy water and a hose. Be aware of the change of seasons which could add extra pollutants into the air like pollens, ragweed, and cottonwood. This debris easily finds its way into the filters and creates an unhealthy indoor environment.

You can also perform a simple visual inspection of working components inside your furnace by removing the access cover and checking – with a flashlight – for loose fan belts, frayed electrical wires, or a build-up of dirt and dust. Simple solutions include tightening or replacing belts, repairing wiring, and vacuuming out dirt and dust with a hose attachment. All of these actions will keep your furnace working better and prevent future failures.

You can also do a visual check of your home’s ventilation system, paying close attention to any cracks in duct seams or holes in flex ductwork. Using sealing cement or duct tape can usually fix these problems and allow for better, unrestricted air flow. Again, these actions will help your furnace work more efficiently and avoid premature failures.

Maybe the best advice for preventing heating system breakdowns is to have a regular maintenance schedule with a local qualified heating contractor. Most contractors can set you up with annual furnace and ventilation system inspections. Having a service agreement – as a rule – gives you priority emergency repairs and discounts on parts and services. Besides that, planned maintenance is also preventative maintenance, something that will give you peace of mind in the long run.

Tags: , , , , ,
Posted in Heating | Comments Off

Five Important HVAC Maintenance Tips from a Champaign Contractor

Monday, November 28th, 2011

Do you have a “mental checklist” of chores that need to be done a regular basis around your Champaign home, such as cleaning the window treatments, washing windows, shampooing rugs, etc.? There are various areas of your home that need regular maintenance and cleaning – and that list includes your heating and cooling (HVAC) equipment. Do you know a poorly operating furnace can cost you in increased energy usage and higher utility bills? That same poorly operating furnace can be discharging harmful carbon monoxide gas into your home, creating a health risk.

So, it is important to keep your furnace in peak operating condition and the best way to do that is by making a checklist of HVAC maintenance tasks. Let’s look at five of them.

  1. Check your filters. Routine replacement of your furnace filters should be every 1-3 months, depending on the indoor air quality of your home, number of occupants, size, etc. You can purchase disposable filters online, at a local “big box’ retailer, or from your local HVAC contractor. A visual inspection of your filter is the best way to determine if it needs replacing. If you have a removable electronic filter, it should be cleaned every few months using soapy water and a hose. Any restrictions to air flow through the filters can lead to poor indoor air quality and will cause your furnace to work even harder to circulate warm air through your duct system.
  2. Clean and insect the blower assembly and motor. You can do this with a vacuum. Also check the fan belt to make sure it is not too loose or if it has any cracks or splits.
  3. Look for any obstructions in vents and returns. Believe it or not, your furnace needs “help” to operate. Any build-up of dirt or debris around the grilles of your ventilation system will just make your furnace work a lot harder. Do a visual check inside and outside and pay special attention to flues and chimneys, where indoor air is exhausted. Any blockage can result in an accumulation of poisonous carbon monoxide gas.
  4. Keep the area clean and clear around your furnace and water heater. Never store flammable liquids near your heating equipment. Your furnace room is not a storage closet.
  5. Revisit your home’s insulation. When was the last time you checked out the insulation in your attic or crawlspace? Is it securely in place or drooping down? Are there bald spots where the insulation has deteriorated? Is the insulation sufficient or should it be upgrade?

Tags: , , , , ,
Posted in Heating | Comments Off

Did You Change that Furnace Filter? A Tip from Gifford

Monday, November 14th, 2011

No matter what type of furnace you have, it’s important to remember to change or clean the filter on a regular basis. This is a relatively straightforward process and doesn’t require a Gifford professional‘s help. However, if you’re not sure how to go about doing it, you can always have your heating technician demonstrate the process for you on their next regular maintenance visit.

Indeed, changing or cleaning out the furnace filter is an important part of regular furnace maintenance. However, it often needs to be done more than once a year. The specific amount of time that you can go between filter changes depends on many things, but typically it’s good to check on it once every three months or so.

If you have a lot of pets or if anyone in your family has severe allergies, it may be worth it to check and change the filter even more often. Check with the manufacturer to see what their recommendations are as well. Some high performance furnace filters can last up to six months or even a year, but you should still check on the filter periodically to make sure that too much hasn’t built up on it in between replacements or cleanings.

You’ll need to make sure you have the right type of filter to install as a replacement as well. You can get this information from the owner’s manual of your furnace, from the manufacturer or by taking out and examining the current filter in your furnace. Some furnaces also have filters that are meant to be cleaned and then put back in and the cleaning instructions are usually located near the filter itself.

Of course, in order to change your filter you’ll first have to be able to find it. Most of the time, the filter will be located near the blower towards the bottom of the furnace. However, if you’re not having much luck finding it, your owner’s manual should be able to tell you quickly where it is and how to remove it. Before you go to open the chamber and take the filter out, however, be sure you’ve turned off the power to the furnace.

Changing your furnace filter can help improve the air quality in your home and it is also very important when it comes to keeping your furnace running efficiently and effectively. The filters are there to trap airborne particles that can get into the blower and clog it up. When that happens, the performance of your furnace will likely drop and you’ll need to have a professional come out and complete the necessary repairs.

Tags: , , , , , ,
Posted in Heating | Comments Off

Gas Furnace Tips from Springfield

Friday, November 4th, 2011

Proper care of a downflow gas furnace starts with proper installation and continues through routine cleaning and maintenance. But before you can even have a downflow gas furnace installed, you need to make sure it’s the right fit for your Springfield home.

Downflow gas furnaces are so named because of the direction that air flows through them. The cooler air is taken in at the top and directed downward, heating up as it travels, and then is expelled through the bottom of the furnace into ducts that feed the rest of the house. Because of this configuration, downflow  gas furnaces are typically installed in attics as opposed to basements.

If you have a basement and you’d rather install your furnace there, then an upflow furnace is probably the better choice for you. However, as many newer homes don’t have basements at all, downflow gas furnaces are growing in popularity and usefulness.

As with any other furnace, it’s important to have a downflow gas furnace professionally installed. This will ensure that the venting system is properly in place and that your house will be heated as effectively and efficiently as possible.

Of course, there are some other things you can do to help your furnace heat your home and keep your energy bills down. For instance, make sure you have proper insulation everywhere, particularly in the attic and crawlspaces where much of the normal heat loss in a home occurs.

You can also make your home more airtight in the winter by sealing up any unused windows and doors with plastic and making sure all storm windows are in place. Basically anyplace that a draft could develop, you could be losing heat and that costs you money. So to ensure that all of the money you’re spending to heat your house is actually going to that purpose, check periodically to make sure your home is still sealed up tight.

Also, just like any other type of furnace, a downflow gas furnace will require regular maintenance to make sure it continues to run efficiently and to replace any parts that may have worn out over time. Having a professional technician come out once a year to carry out this type of service will wind up saving you a bunch of money and can help catch problems before they are able to get out of hand.

Tags: , , , ,
Posted in Heating | Comments Off

Warning Signs of a Broken Furnace (and Happy Halloween Weekend!)

Friday, October 28th, 2011

Everyone at Lanz Heating and Cooling wishes you a Happy Halloween weekend! We hope you have a great time dressing up and eating lots of candy! And to keep your weekend from getting too scary (and cold), here are the warning signs of a broken furnace.

How do you know when your furnace is “on the fritz?” There are warning signs of a broken furnace and some are recognizable – but not all. A broken furnace not only deprives your home of heat and comfort, it also can be deadly, too.

Let’s look at some of the warning signs.

Each year, hundreds of people die and many more are injured from the most common household poison: carbon monoxide. This colorless and odorless poisonous gas comes from several sources and the furnace is the most common source of all; more precisely a broken or malfunctioning furnace. Carbon monoxide is a result of incomplete combustion of a fossil fuel, which is when a fuel does not burn correctly or completely. In a furnace, carbon monoxide gas comes from a poorly operating burner or a cracked heat exchanger. A properly tuned and maintained furnace greatly reduces the risk of carbon monoxide poisoning.

Since carbon monoxide gas is colorless and odorless, it can go undetected. It can make people sleepy and create flu-like symptoms. Sometimes a person may fall asleep and never wake up. But there are warning signs. Drowsiness, vomiting, or flu-like symptoms are a warning sign. Regularly scheduled maintenance of your furnace by a qualified heating and cooling professional and installation of carbon monoxide detectors can reduce the risk of falling ill to carbon monoxide gas.

Another warning sign is a higher energy bill. Sometimes you can’t detect a problem right away because, like carbon monoxide, there may be no obvious signs. Higher utility bills can be a sure sign of a furnace that is working too hard and running more than usual. This may be a result of clogged or dirty air vents, or dirty filters. If your monthly bills are higher than those of the previous year, it may not just be because gas prices are higher.

There are other warning signs of a broken furnace, too. The most obvious is the failure of your furnace to bring your home up to the desired thermostat settings or to maintain an even temperature. Cold or uncomfortable houses are sure signs of a broken furnace. The furnace may cycle on or off, causing an uneven or inconsistent flow of heated air. This can be because of a poor blower or a clogged furnace filter. If you don’t feel any moving heated air or detect any unusual odors or smells coming from your heating vents, that’s a sure sign of a broken or malfunctioning furnace.

A broken or cracked gas line can emit odors and can cause a furnace to malfunction, too.

Don’t take a chance of losing heat and comfort this winter. At the first possible warning sign, call your local heating and professional for a heating system tune-up.

Tags: , , , , , , ,
Posted in Heating | Comments Off

Why You Should Have Your Furnace Serviced Every Heating Season: A Maintenance Tip From Buckley

Wednesday, September 28th, 2011

Particularly if you’ve just purchased a new furnace for your Buckley home, maintenance is probably not something you think about all that much. As long as it works when you need it to, that is. Unfortunately you usually find out that something is wrong with your furnace just when you need it most. However, there is a way to avoid that kind of problem, and many others, and that’s to have regular maintenance service performed on your furnace by a home heating professional every year.

One of the main reasons to have your furnace serviced is that it allows technicians to catch small problems before they become large ones. During a typical maintenance visit, a technician will examine all parts of your furnace to ensure that they are still in good working order. He’ll also thoroughly clean out the unit to make sure there are no buildups of debris that could cause problems or impede the furnace’s energy efficiency.

And if they do find something wrong like a part that’s beginning to wear out or something that just isn’t working properly, the technician can make the necessary repairs right away. You can get the problem taken care of ahead of time and you won’t have to worry about going without heat during the coldest part of the winter.

That’s not the only reason that annual maintenance is important and beneficial, however. It can also help you save money, both on your monthly energy bills and in the long term. That’s because annual maintenance tune ups keep your furnace functioning at peak efficiency levels longer than they would be able to otherwise.

A typical furnace will lose a small percentage of its energy efficiency every year, and while it won’t seem like a lot at first, that can really add up over the course of a couple of years. With regular maintenance, though, you can often maintain up to 95% of your furnace’s original efficiency for the life of the furnace.

Plus, when the proper maintenance and service is performed on a regular basis, your furnace will simply last longer.

Tags: , , , , ,
Posted in Heating | Comments Off