Posts Tagged ‘Iroquois County’

« Older Entries

Urbana Plumbing Question: How Can I Get Better Flow from My Faucets?

Monday, July 23rd, 2012

Most of us realize that a drain can get clogged or that the pipes in our home might require extra repairs every now and then, but rarely do we realize that when the faucet is not providing a strong, steady flow of water, it is likely because of a clog in the actual faucet. If you are suffering from low flow in your Urbana faucets or worse, sputtering and clogging, here are some tips to help fix the problem.

Why it Happens

The reason that so many faucets now have problems related to clogging is that they have been changed and redesigned over the years to reduce water flow. Older faucets would pour ridiculous amounts of water through the drain – not at all good for the environment. Today, aerators and other technology advancements greatly reduce the amount of water used, but also tend to cause these types of clogs.

Checking Your Aerator

The easiest way to fix a slow flowing faucet is to check the aerator tip for unwanted sediment. Despite filtration of tap water, over time small bits of sand, dirt, and other sediment can and will build up in the aerator. That sediment should be cleaned out of the tip of the aerator at least once a month to keep it from slowing the flow of water.

If a water main breaks somewhere or a problem occurs in the water supply outside of your home, this type of sediment might start to build up more rapidly and cause immediate clogs in your faucet. Other things that might build up include pieces of pipe or flux from plumbing joints that break free and enter the water supply. None of it poses a health problem, but it can be frustrating when it gets into your faucets and blocks the water supply.

Valve Cartridge

If the aerator is not the problem it may be in the valve cartridge. To fix this, you will need to replace the part. Each faucet can be very different, so you should refer to your owner’s manual (many of which are online) for how to take this part out of the faucet assembly. When you go to the hardware store, be sure to take the valve cartridge with you so you can get the exact piece you need for replacement.

The easiest way to avoid a clog in your faucets is to be careful with any repairs you make. While a water main break is not something you can control, you can control how the water supply is affected when someone does repairs on your Urbana home’s plumbing. Leave faucets open outside, turn the main valve back on slowly and check your faucet immediately after the repair to ensure no sediment gets clogged in the assembly. If you have any problems, call Lanz Heating & Cooling!

Tags: , , , , , , ,
Posted in Plumbing | Comments Off

Ivesdale AC Guide: Common Air Conditioner Problems

Monday, July 2nd, 2012

Our Ivesdale air conditioners are an important part of our lives. They keep us comfortable despite overbearing heat and humidity outside all summer, but because they run constantly for months and because they are such complicated pieces of machinery, they are prone to some problems. Here are some of the most common problems you’re likely to run into with an air conditioner and how to solve them:

Leaks

A common problem that many people ignore or are unaware of is refrigerant leakage. It is possible that when the system was installed, it wasn’t properly charged, but most of the time if your system is low on refrigerant, it is because of a leak. You can’t just pour more refrigerant in and call it good, though.

The leak needs to be fixed, both for health and environmental reasons. If you notice that your system is low on refrigerant or you smell something off – often like acetone, call an Ivesdale air conditioning professional immediately for inspection and repair.

Sensors

An air conditioner doesn’t do you any good if the sensors don’t work properly. Improperly working sensors will fail to properly read the temperature in the home or from your thermostat. So, it might be 80+ degrees in your home but if the thermostat reads it as 72, the system won’t turn on. The air conditioner itself probably still works fine, but unless it can successfully read the temperature, you won’t get the cooling you need to stay comfortable.

Check first to see if the sensor was moved or knocked toward the evaporator coil (which will keep the temperature reading low).

Drainage Problems

Your Ivesdale  air conditioner acts as a dehumidifier as well, producing a liquid known as condensate. This liquid usually drains from the air conditioner into a designated area away from your home. However, if the condensate drain gets clogged or if the system wasn’t properly installed, that condensate can start to build up in your home. If you notice leakage around the coils, you may need a pump to remove the condensate properly.

Properly maintaining your air conditioner can usually be done with regular maintenance each year, but if one of these problems pops up, call Lanz Heating and Cooling and get them fixed right away.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Champaign Plumbing Guide: Sump Pump Maintenance

Monday, June 18th, 2012

A good sump pump is the only thing standing between you and a basement full of water, so it makes sense to implement a good maintenance plan for your Champaign sump pump. A lot of homeowners don’t even think about their sump pumps, however, probably because they are buried out of sight, but the only way to know for sure that it will work when you need it most is to keep it in good operating condition. Here are some tips to help you do just that:

  • Check the GFCI – Your sump pump should be plugged into a Ground Fault Circuit Interrupter (GFCI). This is a special outlet that keeps the system from getting waterlogged. If it gets damp, it shuts down, turning off your sump pump. Unfortunately, GFCIs can be faulty or break, so check it regularly to make sure it is always on.
  • Upright Operation – If you have a standing sump pump, make sure it stays upright and doesn’t fall over when operating. These things can move a lot and if they do fall over, they may not pump properly.
  • Test it Regularly – Pour water into the sump pit when empty to make sure it will work when needed. Most people who need emergency service could have pinpointed the problem weeks or months earlier if they had known the system was broken.
  • Check the Outlet Pipes – Check the outlet pipes regularly for leaks or damage. If they start leaking back into the foundation, they can cause damage or leakage into the basement.
  • Clean the Grate – Submersible pumps are often left to sit in their pits for months or even years without cleaning. At least once a year, remove the sump pump from its pit and clean away any gunk that’s built up. Stones or debris in the pump can break the motor if left unchecked.

A good sump pump is all that stands between your home and a boat load of water whenever it rains. To keep your home clean and dry, check your pump often and if necessary, call someone for routine maintenance.

Most of the problems that pop up with sump pumps can be avoided entirely if they are maintained on an annual basis. Sometimes you may need to call a Champaign plumbing professional for advanced cleaning or part replacement. Call Lanz Heating and Cooling today if you need any help with your sump pump!

Tags: , , , , ,
Posted in Plumbing | Comments Off

The Technology of Video Pipe Inspection

Friday, March 16th, 2012

Let’s face it – technology is the answer for almost everything in McLean County. If it’s mechanical, it has been affected by technology. The world of plumbing is no exception. Technology now makes it possible for people to look inside the piping in their home – to get the “inside story” on why a pipe is blocked up or why water is flowing too slowly. A trained expert can use video pipe inspection technology to quickly diagnose a problem in order to find a solution.

So what types of technology are available today? Before we get to that, remember that technology is fluent. By the time you read this blog there may be something new to make this material outdated. The best way to keep up with the latest technology of video pipe inspection is to talk to your local plumbing professionals and check out updates on the Web.

The technology you will see in your home can be viewed live or via digital recording. The camera and its scope can grab a birds-eye view of the pipe without the need to unscrew fittings and elbows and without having to make a mess of things.

Plumbers making a service call who use video inspection will usually show homeowners some live pictures from inside their pipes or use a digital reproduction in their sales presentation. In either case, the camera doesn’t lie and repairs are quickly supported by video evidence.

Here are some of the components involved in the technology of video pipe inspection. First and foremost is the camera itself, which usually will have high definition image display, recording, and playback capabilities. Images can be stored on flash cards for downloading onto other computers or to the Web. The lens of the camera is mounted into the head of the scope, which could be made of fiber optic or fiberglass material. The scope or “snake” comes in a variety of lengths. Images from the camera can viewed on monitors of various sizes in color or black-and-white.

Other options may include audio capabilities for a plumbing professional to record what the camera sees and explain the problems and solutions to homeowners via voiceover technology.

According to one plumber who utilizes this type of technology, video pipe inspection provides “an assessment of pipe’s structural integrity, detection of blockages, breaks or defects, still image/video footage for client use, and first-time mapping or updates.”

If you want to utilize the latest technology to diagnose pluming problems in your home, call Lanz Heating & Cooling and ask for a video pipe inspection.

Tags: , ,
Posted in Plumbing, Plumbing Maintenance, Video Camera Pipe Inspection | Comments Off

Happy Valentine’s Day From Champaign County’s Favorite Plumbers, Lanz Plumbing

Tuesday, February 14th, 2012

Everyone at Lanz Heating and Cooling wishes you a very Happy Valentine’s Day! We hope your day is full of love and laughter! Valentine’s Day is a time to really appreciate all of the wonderful people in your life, including your significant other, your family, and your friends. Take a moment today to let each of them know how special they are to you. Even something simple, like a handmade card, can really make someone’s whole day!

While your HVAC system might not seem like the most romantic place to start your gift giving, a few simple upgrades can make your house more comfortable, which is something your whole family will appreciate! A HEPA filter can keep dust and allergens out of your air, and a new furnace or heat pump can keep your house at more consistent temperatures and cut down on your energy use. An upgrade to your HVAC system is truly a gift that keeps on giving!

For more information about easy ways to improve your home, give Lanz Heating and Cooling a call! And to help make your Valentine’s Day as happy as it can be, here is a recipe for Ghirardelli Chocolate Raspberry Cheesecake Hearts

Ingredients

  • Crust:
  • 1 1/2 cups chocolate graham cracker crumbs
  • 1/2 cup ground almonds
  • 4 tablespoons white sugar
  • 3/4 cup butter, melted
  • Cheesecake:
  • 4 (8 ounce) packages cream cheese, softened
  • 3/4 cup white sugar
  • 4 eggs
  • Raspberry puree (recipe below)
  • 2 cups Ghirardelli 60% Cacao Bittersweet Chocolate Chips
  • 1/2 cup heavy cream
  • Raspberry puree:
  • 1 (10 ounce) package frozen raspberries
  • 4 tablespoons white sugar
  • Chocolate Ganache (optional):
  • 8 ounces Ghirardelli 60% Cacao Bittersweet Chocolate Chips
  • 1/2 cup heavy cream
  • Additional Garnishes (optional):
  • Fresh raspberries
  • 8 ounces white chocolate, melted for drizzling

Directions

  1. Preheat over to 325 degrees F (165 degrees C).
  2. CRUST: In a microwave safe bowl, melt the butter. Add the chocolate graham crackers, ground almonds, and sugar and mix until combined. Press mixture into the bottom of a 9-inch springform pan and set aside.
  3. PUREE: In a saucepan, combine raspberries and sugar. Bring to boil, and continue boiling 3-5 minutes, or until sauce is thick. Strain sauce through a mesh strainer to remove seeds and set aside.
  4. CHEESECAKE: In a small pot over low heat, bring the whipping cream to just boiling. Remove from heat and add the chocolate chips. Set aside for 5 minutes and then stir until smooth.
  5. In a large bowl, mix together cream cheese and 3/4 cup sugar until smooth. Beat in eggs, one at a time. Remove approximately 1 1/2 cup of this batter and place into a smaller bowl and add 1/2 cup raspberry puree. Blend until combined. Add the melted chocolate to the remaining batter and mix until combined. Pour the chocolate cheesecake batter into the pan. Very carefully layer the raspberry cheesecake mixture on top of the chocolate mixture. Bake for 60 to 75 minutes, or until filling is set. Cool in pan, then cover with plastic wrap and refrigerate until cold before removing from pan.

For more details, visit allrecipes.com.

Tags: , ,
Posted in Furnace, Heat Pumps, Heating, Holiday | Comments Off

Thomasboro Plumbing Guide: How to Eliminate an Odor Coming from a Garbage Disposal

Wednesday, January 4th, 2012

If you have a garbage disposal in your Thomasboro home, as most people do these days, you probably consider it an indispensible part of your household equipment. However, it is not uncommon for odor problems to develop with a garbage disposal. This is certainly an unpleasant situation, but luckily it can usually be quickly and effectively remedied.

The main reason that garbage disposals begin to smell is that they catch bits of food and other items that go down the drain. This is perfectly normal, and all you have to do to keep it from becoming a bigger problem for you is to clean your garbage disposal on a regular basis.

If you are up for a pretty intensive cleaning, you can turn your garbage disposal off and take off any removable parts for scrubbing with soap and warm water. It is vital that you make sure your garbage disposal is off and stays off as you do this. This is a great way to take care of a garbage disposal odor, but it will not keep it from coming back.

It is also not necessary to get in there and deep clean your garbage disposal on a regular basis. Instead, you can carry out a few less intensive procedures to help keep your garbage disposal odor free. No matter what cleaning method you use, it is also important to remember to keep your water running any time you turn your garbage disposal on and for about thirty seconds afterwards. This can go a long way towards ensuring that food and other sediment does not build up inside.

One of the reasons that garbage disposals seem difficult to clean is because you cannot use many of the more common household cleaning chemicals on them. Harsher chemicals can damage or erode parts of the garbage disposal, potentially causing larger problems for you later on. Fortunately, there are actually a lot of products that you probably have around your house already that can make cleaning your garbage disposal and getting rid of the unpleasant odor a quick and easy chore.

One good solution is to cut a lemon in half and put it down your garbage disposal along with some baking soda. Once they are down there, turn on the water and then turn on the garbage disposal. Leave it running until you are sure the lemon is gone and you can be confident that the smell will be gone also.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

How do I Check a Gas Furnace Draft Pressure Switch? A Question from Bondville

Wednesday, November 9th, 2011

There are many reasons why a furnace stops working and in many cases, a Bondville homeowner can perform some simple diagnostics to pinpoint the problem. Finding the problem is one thing – fixing it is another. When in doubt, don’t try it yourself. Call a qualified professional.

But let’s look at one possible problem and solution you may be able to perform yourself – testing the draft pressure switch. The draft pressure switch on a gas furnace allows an electrical current to pass through to ignite the furnace. The pressure switch monitors the draft conditions and won’t allow the furnace’s gas valve to open unless draft is correct.

If the switch is malfunctioning, so too will (or will not) the furnace.

The best way to locate the switch is by consulting with your owner’s manual or by going online and simply typing in the words “gas furnace draft switch.” It is identifiable by its round size and is bolted to the outside of the furnace. It should be nearby the draft inducer motor because the two are connected by a metal tube. The tube may sometimes be the culprit, too. A tube that is blocked with condensation may cause the switch to go bad.

To check for proper function, first turn off power to the furnace, either by shutting down the “on’ switch at the furnace or shutting off the circuit breaker.

Use a volt ohm meter to check if the switch is opening and closing properly. Start by zeroing out the meter’s probes by touching the tips together. Using the dial (could be analog or digital), set the meter to 24 volts. Ground the black probe by attaching it to any metal part of the furnace. Then place the end of the red probe on the metal tube connecting the draft pressure switch to the draft inducer motor.

If the switch is working properly the meter should read at least 24 volts, or very near that. If the reading is short of 24 volts, the switch is not working correctly. At that point you may decide to replace it or call a professional to do the task (recommended).

Always remember that there are many sources which will help you diagnose and repair a problem, especially those available through the Internet. If you search YouTube.com you will find many videos advising you on how to repair certain components. Use all of the resources available to you and keep the phone number of a qualified and professional heating and cooling contractor nearby.

Tags: , , , , ,
Posted in Heating | Comments Off

Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else? A Guide from Sadorus

Monday, November 7th, 2011

If your room temperature is too hot or cold in your Sadorus home, what is the first thing you check? Probably the thermostat. If you are a homeowner, you probably have played around with the setting on a thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really the thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in the home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot a thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Tags: , , , , , ,
Posted in Heating | Comments Off

Furnaces vs. Heat Pumps: A Guide From Dewey

Friday, October 14th, 2011

If you’re preparing to replace your existing heating system in Dewey, you may very well be struggling with the question of whether to go with a furnace or a heat pump for all of your future home heating needs. Each of these systems have their own advantages and drawbacks, and once you’ve narrowed it down to one type or the other, you’ll still have a pretty wide variety of products to choose from.

Furnaces are still the most popular type of home heating equipment on the market. You can get furnaces that run on gas, oil or electricity, although gas furnaces are by far the most common type of furnace around these days. The latest models are extremely energy efficient, with AFUE ratings reaching into the high 90%s.

Like heat pumps, furnaces use ducts to transfer heated air throughout your home. They typically require regular maintenance once every year or two depending on the type of furnace you have. Most modern furnaces are also made to be compatible with a central air conditioning or cooling system as well.

Heat pumps, on the other hand, don’t generate the heat that they circulate throughout your house. Instead they are able to extract the heat from the air outside and pump it inside. This means that they use much less energy than even the most energy efficient furnaces.

However, heat pumps are only capable of heating your house comfortably when the outside temperature is above freezing. If you live in an area with particularly long and frigid winters, you’ll probably find that you need to supplement your heat pump with another heat source. Because of this, it actually makes little sense to use a heat pump in more extreme climates.

On the other hand, if you live in an area with relatively mild winters, heat pumps can be a great option. They provide a constant flow of warm air to all parts of your home and can also keep you house cool during hot summer months. To cool your home, heat pumps simply reverse the process they use to warm it. They take the heat out of your indoor air and pump it outside. This is a very effective home cooling method and makes heat pumps a great solution for year round comfort.

Tags: , , , , , ,
Posted in Heating | Comments Off

Geothermal Myths: Some Information From Bellflower

Monday, September 26th, 2011

As with any misunderstood technology, there are a lot of myths and misconceptions concerning geothermal heat pumps and how well they work in Bellflower. While these types of systems certainly have their limitations, the same is true of just about any type of heating and cooling system you could have installed in your home. But if you are really trying to evaluate whether or not a geothermal heating system is right for your home, you need to know exactly what is true about these systems and what is just not true.

For instance, there is a widely held belief that geothermal energy is not a viable heating option in areas with harsh winters. The fact is, though, that even when the air temperature outside is below freezing, the temperature several feet below ground can be as high as 55°F.

With a ground temperature like that, a geothermal heat pump will have no trouble extracting enough heat to keep your home comfortable even when it is well below freezing outside. And even when the ground freezes, the frost usually only extends three or four feet below the surface. Since the pipes for your geothermal heat pump will be at least four feet down, the frost should not affect them at all.

Also, it is common for people to assume that geothermal heat pumps will always need to have a regular heating system in place to serve as a backup. In fact, a geothermal heat pump is quite capable of providing consistent and adequate heating for your entire house as long as it is properly sized and installed. Make sure you are dealing with an experienced and qualified contractor and you will have no problems along these lines.

There are also plenty of myths floating around out there that geothermal heat pumps are just too expensive to make sense as a home heating solution. The truth is that geothermal heating costs almost nothing to operate.

While it is true the geothermal systems are quite a bit more expensive to install than many of the other options, alternative heating systems will still cost a significant amount to install and you will also have to pay much more to operate them on a regular basis. With a geothermal heating system, you pay quite a bit up front, but it is a one-time cost and there will be minimal monthly heating bills after that.

Tags: , , , ,
Posted in Geothermal | Comments Off

« Older Entries