Posts Tagged ‘Sanagmon County’

« Older Entries

Bathtub Replacements in Ford County: Why You Should Call a Contractor

Tuesday, February 28th, 2012

A bathtub replacement is not an aspect of bathroom plumbing that you will have to worry about every day. However, there will likely come a time when you do need to get rid of your old tub and put in a new one. Whether your old tub is simply beyond repair or you just decided that it was time for a change, putting in a new bathtub is a significant undertaking.

Even if you have considerable plumbing installation skills, you would do well to hire an outside contractor to take care of a bathtub replacement or installation project. There are a lot of factors to take into account when you are installing a bathtub in your home, and experienced contractors know what to look for and how to adjust to the various situations that can arise.

For one thing, you will probably have a very hard time physically moving both the old tub being replaced and the new on that needs to go in. And even if you are physically capable of moving this type of heavy equipment, you will still run the risk of damaging other parts of your house in the process. A skilled contractor with a team can much more easily get an old tub out and a new tub in place.

Plus, when you hire a contractor for this type of work, you will most likely not have to worry about how to dispose of your old tub once you are done with it. The majority of contractors will take care of this type of disposal for you, which is a big help since you probably do not want an old bathtub sitting in your yard indefinitely.

Another thing to consider is that the plumbing work needed to properly put a bathtub in place is rather complicated. You need to have relatively advanced plumbing skills in order to carry it out properly. And if you do not manage to complete a proper installation, you will have no end of problems later on. It is well worth the investment to have a contractor come in and install your bathtub when the alternative is paying for more costly repairs later on.  Please call Lanz Heating & Cooling with any questions.

Tags: , ,
Posted in bathroom Plumbing, Plumbing, Plumbing Maintenance | Comments Off

White Heath Plumbers Guide: How to Install a Toilet

Tuesday, January 3rd, 2012

Your White Heath home’s toilet is a relatively basic piece of plumbing equipment, but that does not mean that installing it is easy. This is certainly a job that many people can do on their own, but you should be prepared to devote the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

Space Heating vs. an Upgrade to Your Danville Heating System

Wednesday, December 21st, 2011

If your Danville home’s heating system isn’t really cutting it anymore, it may be time to take a step back and consider what your options are. After all, upgrading to an entirely new heating system is a big investment and a large project that will likely disrupt your life at least for a short period of time. However, under certain circumstances it’s the best alternative out there.

One option to consider when you’re unhappy with your home heating situation is supplementing your central heating system with space heaters. These are generally inexpensive and can be placed virtually anywhere in your house or taken with you from one room to another.

Especially if there is a small part of your home that your heating system just doesn’t seem to reach or that you want to keep a bit warmer than the rest of the house, space heaters can be an excellent option. They’re small, safe and portable and can easily keep a smaller portion of your home or room cozy and warm.

However, you’ll have to take into account the operating costs of a space heater as well as the initial investment when you’re trying to evaluate the overall cost effectiveness of this option. Most space heaters run on electricity, which often costs considerably more than oil or natural gas. If your home heating system runs on electricity anyway, this might not be so much of a factor. But if you have an oil or gas furnace, you could wind up paying significantly more to run space heaters as supplemental heat over time.

Also, it’s worth considering that new home heating systems are likely much more energy efficient than the system you currently have in place. Although the initial installation cost can be pretty substantial, you’ll wind up saving a very large amount on your monthly heating bills by upgrading to a newer model.

Plus, you’ll be getting a system that should be able to satisfactorily heat your home without the need for space heaters or other supplemental heat sources. This translates into a pretty hefty savings over time and that’s something you’ll certainly have to take into consideration when you’re evaluating your options.

Tags: , , , , ,
Posted in Heating | Comments Off

A Guide from a Danville HVAC Contractor: Heating System Preventative Maintenance

Wednesday, December 7th, 2011

Ben Franklin once said, “An ounce of prevention is worth a pound of cure.” His famous quotation can apply to many things in life, including the heating system in your Danville home. While heating systems in Ben Franklin’s time consisted of wood burning stove and fireplaces requiring little maintenance, today’s sophisticated furnaces and building controls require a good dose of preventative maintenance in order to avoid mechanical failures and inefficient operation.

For example, a furnace runs better and lasts longer when you maintain a regular schedule of filter cleaning or replacing. A dirty or clogged filter can restrict airflow from the furnace into your home’s ventilation system and cause the furnace to work harder, putting more wear and tear on it and taking months, if not years, off of its useful life. If your furnace uses disposable filters, check them every month and replace them if necessary. If your furnace uses an electronic filter that requires cleaning, check it on a monthly or semi-monthly basis and clean it with soapy water and a hose. Be aware of the change of seasons which could add extra pollutants into the air like pollens, ragweed, and cottonwood. This debris easily finds its way into the filters and creates an unhealthy indoor environment.

You can also perform a simple visual inspection of working components inside your furnace by removing the access cover and checking – with a flashlight – for loose fan belts, frayed electrical wires, or a build-up of dirt and dust. Simple solutions include tightening or replacing belts, repairing wiring, and vacuuming out dirt and dust with a hose attachment. All of these actions will keep your furnace working better and prevent future failures.

You can also do a visual check of your home’s ventilation system, paying close attention to any cracks in duct seams or holes in flex ductwork. Using sealing cement or duct tape can usually fix these problems and allow for better, unrestricted air flow. Again, these actions will help your furnace work more efficiently and avoid premature failures.

Maybe the best advice for preventing heating system breakdowns is to have a regular maintenance schedule with a local qualified heating contractor. Most contractors can set you up with annual furnace and ventilation system inspections. Having a service agreement – as a rule – gives you priority emergency repairs and discounts on parts and services. Besides that, planned maintenance is also preventative maintenance, something that will give you peace of mind in the long run.

Tags: , , , , ,
Posted in Heating | Comments Off

How Heating Zone Control Can Save You Money: Some Pointers from Homer

Wednesday, November 16th, 2011

The costs of heating your Homer home have risen dramatically over the past couple of decades, thanks to higher energy costs and price increases for heating equipment. Despite the strides made in energy efficiency, there seems to be no end in sight for the steady rise in heating equipment operating costs.

Now add in the cost of heating unoccupied areas of your home, such as basements, hallways, or extra bedrooms, and the energy costs go even higher. Most of these costs are unnecessary and avoidable if you have the time and a small investment in a well-planned heating “strategy” for your home. This strategy involves using heating zone controls to make the most efficient use of your heating system.

In a nutshell, here is how heating zone control works. The rooms in your home are connected to your heating system by a series of ductwork, which carries heated and conditioned area to all corners. But some of these areas may not need to be heated as much – or possibly at all – compared to other rooms in your home. For example, do you need heat in your kitchen but not in your basement? Most people would answer yes. Or they may say they need more heat in the kitchen and some, but not very much heat in the basement.

Or try this: do most people in your house spend more time in one room, such as the family room, and less time in their bedrooms? If so, why would it be necessary to heat the bedrooms all of the time? In order to deliver heat to areas in your home that need it the most, the ductwork to these rooms should always be “open.” Ductwork to other unused areas of your home can be “closed” during various times of the day.

Opening and closing of ductwork and airflow is achieved by zone controls. A zone control is installed in the home which electronically or wirelessly opens and closes “dampers” in the ductwork, depending on the heating demand. You can divert heat to areas of your home using zone control and dampers while decreasing the heating load on your furnace. This type of heating zone control will move heated air to where you want it. Simply put, you are not heating areas of your home that don’t need the heat.

The heating zone controls can be programmed for various times of the day, too. For example, you may not need any heat in your basement while you sleep or when you are away from home. You can program the damper in your basement’s ductwork to remain closed or partially open during these times. In a sense, the heating zone control in your home acts like a programmable thermostat – only it uses a series of dampers to control indoor temperatures.

The next time you walk into an unused part of your home, think about how much money you are spending to heat it. It makes sense to consider heating zone controls. The initial costs of installing zone controls and dampers are minimal and the payback in energy savings and comfort are substantial.

Controls save you money.

Tags: , , , , , ,
Posted in Heating | Comments Off

How to Get the Best Heat Pump: A Tip from Champaign

Wednesday, October 26th, 2011

Everybody in Champaign wants a good deal, especially when making a major purchase. People want their money’s worth. They want to feel like they got the best they could for the money they spent.

But how do you decide what the best option is, especially when choosing a product that you know little about, like a heat pump? The average homeowner does not spend a lot of time studying his heat pump or reading heat pump magazines for fun, so chances are you are not a heat pump expert. That’s understandable…but it doesn’t help you when you are trying to buy a new one and you want the best.

Fortunately, there some things you can look for to get clues about the quality of a heat pump and how well it suits your needs.

Efficiency is among the most important factors in choosing a heat pump. Because heat pumps can be used for both heating and cooling, they have two different efficiency ratings, one for each mode.

The heating efficiency for a heat pump is rated on a scale called the heating season performance factor (HSPF). This rating is actually the result of a calculation. To find the HSPF for a heat pump, the unit’s estimated heating output is divided by its energy consumption. Simply put, it’s the ratio of heat put out by the unit to the amount of power it draws. The higher the HSPF, the more efficient the heat pump is. To give a frame of reference, all new heat pumps are required to have an HSPF of at least 7.7. The most efficient units available carry an HSPF of 10.

The rating system used to convey the cooling efficiency of a heat pump is the seasonal energy efficiency ratio (SEER). This is a simple numeric value that rates how efficient the unit is. Many new heat pumps carry a SEER of at least 12, while the most efficient models rate between 14 and 18.

While efficiency is important, it is just one factor. More efficient units are also more expensive, so you will want to consider the upfront cost. The most efficient units will pay for themselves in savings relatively quickly, but the purchase price is still important. Be sure to weigh all the pros and cons when choosing a new heat pump. And if you need any help, talk to your local contractor.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

How is Geothermal Different than Other Heating Systems? A Question from Gifford

Friday, October 21st, 2011

There are many methods to heating a building in Gifford. Early methods included burning coal and wood. Today, sophisticated building controls call for more efficient means of heat – and a method gaining in popularity is geothermal heating.

Many use air handling units to deliver heat – and that method has remained constant over the years. But air handling units are only designed to move air from one space to another. How that air is heated from the source is what differentiates geothermal from other energy sources.

To understand some of the differences, let’s look at the definition of geothermal heat. By definition, geothermal heating comes from its direct use of geothermal energy, which comes from below the Earth’s surface. And the Earth is known as the greatest conductor of heat. The constant, renewable temperature of the Earth (56-58 degrees on average below 10 feet) provides a heat source requiring no energy conversion, which adds to heating efficiency and ultimately, the cost to heat a building.

In order to heat a building, natural heat from the ground absorbs a colder refrigerant, which is circulated throughout the ground by a series of polyethelene tubing, which is generally positioned five to ten feet below the surface. This heat is transported via the refrigerant to a compressor inside a heat pump, where it is compressed and the lower temperatures are transformed from around 50 degrees to temperatures much higher, as high as 100 degrees of more. This hotter refrigerant is circulated through the tubing within an air handling unit, where colder return interior air absorbs the heat. The heated air is then carried to a building’s interior via fans. The refrigerant, with the heat removed, now becomes colder as is re-circulated into the ground to absorb the natural, renewable heat. In essence, the ground provides free heat.

Other methods of heating include forced air natural gas, oil, solar, propane, electric, radiant, and steam. Each heat source requires mechanical means to heat up the supply air. For example, natural gas – which is used to heat about half of all U.S. homes – is heated via a heat exchanger in a mechanical furnace, which runs on electricity. Radiant or steam heat is generated by mechanically raising the temperature of water or refrigerant via electricity. These methods differ from geothermal because the natural heat of the Earth provides the means for raising the temperature of the refrigerant used to transport heat to the air handling unit.

One drawback to using geothermal heat compared to other energy sources is the cost to bring this natural heating method into a building. The initial installation of a geothermal heating system is much higher than conventional natural gas heating – for example – because of the cost to install the tubing called a ground loop beneath the Earth’s surface. No other heat source, other than radiant heat, requires a series of tubing to deliver heat. But then again, radiant heat does not require a ductwork system to transport heated air or remove colder air. Geothermal requires a series of metals tubes to heat the refrigerant and the ductwork to move the heated air throughout the building.

On the flip side, its energy efficiency – using the Earth’s natural heat – is much greater than other heating sources resulting in lower utility costs, often fractions of the cost to use other heat sources. Energy savings could pay for the cost of installing the geothermal system over several years – another characteristic of geothermal heating.

Tags: , , , , , ,
Posted in Geothermal | Comments Off

It’s Time for a New Furnace: A Pointer From Bondville

Friday, October 7th, 2011

Replacing your furnace in your Bondville home is probably not something you want to think about. After all, a new furnace is a big investment and not something you probably have too much experience with. And sometimes having your current system fixed or tuned up is all you need to get your home heating situation back on track. But there are certain situations in which it makes more sense to just go ahead and get a new furnace rather than simply patching up the old one.

For instance, if you have to call for either minor or major repairs to your furnace on a regular basis, it’s probably time to consider investing in a replacement. All of those repairs cost money and chances are that the furnace you’re paying repeatedly to replace isn’t going to last that much longer anyway.

Rather than continuing to dump money into a furnace that just isn’t cutting it anymore, you’ll be better off making the investment in a new unit. The truth is, you’re going to have to do it sooner or later and by buying a new furnace now, you’re actually saving all of the money you would have spent on repairing the old one for another year or so.

Also, a furnace that requires such frequent repairs is probably not functioning all that efficiently either. When you replace it with a newer model, you won’t just save money on repairs. You’ll also likely notice a considerable savings on your monthly energy bills because of how much more efficient your new model is.

Even if you haven’t been repairing your furnace often, you may be able to notice some signs that the old unit isn’t quite up to the task anymore. If you’re suddenly having some significant humidity problems in your house or if your home isn’t being heated evenly, there’s a good chance your furnace is on its way out.

And, in fact, even if your furnace is functioning just fine but is more than 10 years old or so, it’s very likely you’d benefit by replacing it. That’s because the newer furnaces available now are so much more energy efficient than their predecessors that the savings you’ll incur monthly will quickly make up for the initial installation investment.

Of course, you don’t want to get rid of a good furnace if you don’t have to. But if your furnace is getting close to the end of its expected lifespan, you may very well benefit by putting out the money for a new one now so you can start saving right away on your monthly energy bills.

Tags: , , , , ,
Posted in Heating | Comments Off

Is Geothermal Energy Renewable? A Question From White Heath

Wednesday, September 21st, 2011

Geothermal heating systems take heat from the ground and transfer it to your White Heath home. But how does this heat get into the ground in the first place? Conventional heating systems like furnaces use energy sources like oil or natural gas to generate heat. These energy sources are not renewable, and neither is electricity which is typically generated by burning coal or another non-renewable resource.

The renewable resources we usually think of first are solar and wind power. The sun, of course, will continue to shine and provide heat year in and year out whether we make use of it or not. Similarly, we cannot use up the wind. It will continue to blow no matter how many times it has blown before.

But what category does geothermal energy fit into exactly? Well, it is actually a renewable resource just like solar or wind energy. In fact, geothermal energy is a direct result of the sun’s heat relentlessly pounding the ground. The ground actually absorbs a considerable amount of the heat from the sun that reaches the earth every day, and that is the heat that your geothermal heating system is using to heat your home.

Of course, a geothermal heating system cannot run on geothermal energy alone. The indoor components of this heating system that keep the air flowing throughout your house must be powered by electricity. But the amount of energy needed to do this is much less than what you would need to use to run a furnace or other type of more conventional home heating system.

Over all, geothermal energy is an excellent and renewable source of energy. And once you have the heating system in place, you will need to spend very little to keep it up and running. It is an excellent option for many people, and can help to keep your home cool in the summer as well. If you need more information to decide whether a geothermal heating system is right for you, contact your White Heath contractor.

Tags: , , , , , ,
Posted in Geothermal | Comments Off

Save with Maintenance on HVAC: A Guide From Homer

Wednesday, September 14th, 2011

You can never save too much money by making improvements and taking steps around your Homer house. Of course, it is hard sometimes to see exactly where the money saving opportunities are. That’s because you expect to spend a certain amount on various types of services when you own a home. You know you are always going to have heating and cooling bills, for instance. But are they higher than they need to be?

For many people, the answer to that question is “yes.” And it is not because they use their home heating and cooling systems inappropriately or because they have the wrong equipment. It is simply because they neglect to get their HVAC systems the regular care and maintenance that would keep them running at peak effectiveness and energy efficiency.

When your HVAC system is new, it runs well and can be remarkably energy efficient. However, over time that energy efficiency will gradually deteriorate. This drop off in efficiency is often not obvious at first, but if you compare your energy bills from the year you got your system to bills for the same time of year and same usage five years later, you will probably notice that the bill has gone up quite a bit, and not just because energy prices have gone up.

You can do a lot to prevent this loss of energy efficiency, though, if you simply have a professional HVAC technician come out once a year and give your system a tune up. During this type of maintenance service, the technician will check over your entire system looking for worn out parts and buildup that could be interfering with your system’s performance.

They can clean out any areas of your HVAC equipment that require it and they will be able to make any necessary repairs at that time. Often, a technician performing this type of maintenance will be able to catch minor issues before they are able to develop into bigger problems. And while you still have to pay for the maintenance visit, the cost is much less than what you would pay for an emergency repair.

It also represents a substantial savings over what you would be paying on your energy bills every month without it. Regular HVAC maintenance can preserve the vast majority of your system’s energy efficiency loss over time, and it is never too late to start. Even if it has been several years since you had your system installed, you will still be able to get back the vast majority of your original energy efficiency by starting with regular maintenance now.

Tags: , , , , , ,
Posted in Air Conditioning, Heating | Comments Off

« Older Entries